Scavenger Workshop

This listing provides a fully preconfigured aluminum Ghost Trap kit designed by Scavenger Workshop and ready to order directly through SendCutSend. Every part has already been set up with the correct aluminum type, thickness, and bend requirements.
Instead of worrying about material selection, tolerances, or bend angles, everything is handled for you so you can confidently move straight to production. You simply review the parts, add them to your cart, and place your order. The kit includes all major aluminum components required to assemble the Ghostbusters Ghost Trap body, using 5052 H32 aluminum in multiple thicknesses with preconfigured bend operations where needed.
This version does not include the dog ears or axle components, as those require separate machining and must be sourced independently. This is a builder-focused project, not a finished product, and some basic finishing work should be expected such as light filing, cleanup, alignment, and optional body work like sanding, filler, and paint. This approach is intended to provide a streamlined, low-risk entry into aluminum prop building while still delivering a hands-on, authentic assembly experience.
Product Shown has been completed with additional parts not included. Side Tubes, Hat Lights, Knobs, Vector Plate, Resistor, Male Coupler and switches will need to be acquired from other suppliers a good resource for those supplies is https://www.gbfans.com/shop/trap-parts/0/ .



Files

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
United States Imperial Files (Revision 2)

Warning This is an early release and some changes may happen or there may be modifications needed. Only order this if you are prepared to accept the responsibility. This is a community driven project and we make changes based on feedback from members. I have a few people who have already ordered it is fine to wait for feedback from them. The files will always be available to everyone.........I would highly suggest you guys print the trap first and test it or wait until the cool kids get theirs first.

I have separated the kit into sections so people can build it without a huge upfront cost.

Inner Cartridge
https://marketplace.sendcutsend.com/p/C ... -cartridge

Outer Frame Body
https://marketplace.sendcutsend.com/p/C ... outer-body

Dogears
https://marketplace.sendcutsend.com/p/C ... p-dog-ears

Handle
https://www.pcbway.com/project/sharepro ... dc401.html



----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Current files are an early revision and are subject to change.


3D Printable Files (Revision 2)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

PDF Tutorial Document
Coming Soon



Parts List (I would definitely buy extra as I uses these bolts for all of our kits)
1 X Spring for Lever Mechanism https://a.co/d/0h8tCrpv
1 X Pin for lever Mechanism have to cut to 3/4 inch or find correct length https://a.co/d/03BfzP1F
10 X 3mm Pin 6mm Long
10 X 3mm Pin 8mm Long
2 X 3mm Pin 10mm Long
2 X 18-8 Stainless Steel Socket Head Screw, M3 x 0.5 mm Thread, 6 mm Long
3 X 18-8 Stainless Steel Socket Head Screw, M3 x 0.5 mm Thread, 20 mm Long
8 X 18-8 Stainless Steel Hex-Drive Flat Head Screw, M4 x 0.7 mm Thread Size, 20 mm Long
3 X 18-8 Stainless Steel Hex-Drive Flat Head Screw, M4 x 0.7 mm Thread Size, 10 mm Long
10 X 18-8 Stainless Steel Hex-Drive Flat Head Screw, M3 x 0.5 mm Thread Size, 16 mm Long
12 X Zinc-Plated Steel Hex Nut, Medium-Strength, ISO Class 8, M3 x 0.5 mm Thread Size
12 X 18-8 Stainless Steel Hex-Drive Flat Head Screw, M4 x 0.7 mm Thread Size, 8 mm Long


----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


Video Tutorials






Eye Candy


Access panel for release mechanism